Audio Products From Charcroft
If you are looking for the best option for your audio requirements please read on.
OFFERED BELOW ARE AUDIO PRODUCTS WE SUPPLY FROM OUR FRANCHISED MANUFACTURERS
| Related Links & Documents |
|
Resistors
Capacitors
Audio Capacitors
|
The Slit Foil Capacitor has been produced specifically for audio
applications. This is a patented design which eliminates circulating currents in the aluminium foils. This spurious current flow
on the capacitor plates is known to occur, but is not apparent in most applications.
Data Sheet (PDF)
|
|
The T- Network capacitor is a unique capacitor designed specifically for Audio applications. Its main advantage lies
in its ability to reduce the effect of unwanted resistance and inductance placing the signal closer to the
pure capacitance of the component.
Data Sheet (PDF)
|
|
The MR range of capacitors is the result of an extensive ground breaking 2 year research programme into audio grade capacitors.
The resulting capacitor is, we believe at the leading edge of today’s high quality audio grade capacitors.
|
More Information:
|
|
The component is manufactured in
such a way to substantially reduce the negative effects of resonance on sonic quality which is inherent in a wound component.
This results in a sonic characteristic which is difficult to equal.
Manufactured from metallised polypropylene film the
component is housed in a coloured acrylic tube and encapsulated in an epoxy resin to assist in the overall sonic performance.
PME271M EMI Capacitors Class X2, 275VAC - Kemet
Top of Page
| |
Multilayer metallized paper, encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0.
Applications
For worldwide use in electromagnetic interference suppression in all X2 and across-the-line applications.
Data Sheet
|
| |
PEH 169 is a Long Life electrolytic capacitor with outstanding reliability and electrical performance.
Smoothing, energy storage, or pulse operation in telecommunication demanding power supplies, process control, AC-motor control, traction, welding and measuring.
Data Sheet
|
| |
PEH 536 is a Long Life electrolytic capacitor designed to offer high ripple current capability and low mounting cost.
The low ESR is a result of very low resistive paper/electrolyte system.
The low ESR together with the TDC thermal concept gives the PEH 536 a high ripple current capability.
Typical applications for PEH 536 would be SMPS, drives, welding equipment, UPS and other power electronic applications where
high current ratings and compact size are important.
Data Sheet
|
PFR Polypropylene film/foil capacitor - Kemet
Top of Page
| |
Capacitor with polypropylene film and metal foil electrodes. Radial leads of tinned wire are electrically welded to the winding.
Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
High speed applications requiring low losses at high frequencies and high dU/dt.
Typical applications electrical ballasts,TV/video, telecommunications.
Data Sheet
|
|
The DTAC range is a high performance addition to our range. It has been designed to produce the lowest
possible resistance within the component, which we believe has a direct relationship to sonic performance.
|
Data Sheet (PDF) |
More Information:
|
|
A narrow 10μm(630Vdc) polypropylene film with a special spray and heat treatment contribute to the exceptional performance of this capacitor.
These measures combined with hand soldered M8 male or female terminations ensure that the ESR is greatly improved when compared to the
traditional axial leaded components.
The low ESR is particularly relevant in high quality crossover networks, ensuring that loudspeakers perform to their optimum.
Tape and resin colours are flexible with options shown in Custom products. Unless specified, capacitors would be supplied with gold tape and black resin.
|
The PWA range of capacitors has long been established as a quality audio grade device.
Available at ratings of 160Vdc, 250Vdc, 400Vdc and 630Vdc, it offers audio engineers the maximum flexibility when considering components for their circuits.
|
Data Sheet (PDF) |
More Information:
|
|
Wound from 4µm, 6µm, 8µm and 10µm metallised film respectively, components can be selected using their slightly differing sonic performances
and aspect ratios to give the optimum solution desired.
Copper clad steel terminals are standard, however, others are available upon request.
Tape and resin colours are flexible with options shown in Custom products. Unless specified, capacitors would be supplied with white tape and red resin
|
The ESA range of components exploits the knowledge gained during the extensive research programme recently undertaken by ClarityCap.
The research programme looked into ways of reducing mechanical resonances inherent in a wound capacitor to hitherto unachievable levels.
|
Data Sheet (PDF) |
More Information:
|
|
ESA capacitors are designed to offer a mid way house between the highly regarded SA range and the new no compromise MR range.
Manufactured from polypropylene film the component is supplied in the familiar wrap and end seal style,
wrapped in a polyester tape and encapsulated in an epoxy resin.
|
The SA range of capacitors is now recognised as one of the best audiophile components currently available.
Specially developed to meet the needs of the professional audio engineer in both hi-fi and studio monitoring,
these components are the result of extensive consultation between the audio industry and ClarityCap.
|
Data Sheet (PDF) |
More Information:
|
|
The capacitors are hand wound using a 10μm(630Vdc) rated polypropylene film. Following a special heat treatment cycle,
insulated copper terminals are hand soldered to give the best possible connection.
The inherently low dissipation and dielectric absorption factors of polypropylene allied with an excellent mechanical
stability results in an extremely detailed sonic performance.
The construction also results in a low self-inductance and ESR and the devices are highly stable with regard to temperature and frequency.
Tape and resin colours are flexible with options shown in Custom products. Unless specified,
capacitors would be supplied with black tape and black resin.
|
Type SLPX is the best value package snap-in series for 85°C 3000h operation.
This series is the most cost-effective choice for DC filtering and power supply applications where long life and high ripple capability are needed.
|
Data Sheet (PDF) |
More Information:
|
|
Highlights
3000h ripple load life at rated voltage
85°C rated
Small case size with high capacitance
Best for switching power supplies
22 mm to 35 mm diameter, 10 mm lead spacing
Great value snap-in type
High ripple current
